Your Pc Ran Into A Problem And Needs To Restart Stuck At 100: Fixing Windows Startup Issues

Have you ever experienced the frustration of turning on your computer, only to be met with the dreaded message ‘Your PC ran into a problem and needs to restart’? And to make matters worse, it’s stuck at 100%, leaving you feeling helpless and unsure of what to do next.

Well, you’re not alone. According to recent data, this error message is one of the most common issues Windows users face during startup.

But don’t worry – there are steps you can take to fix this problem and get your computer up and running again. In this article, we’ll explore some of the common causes of the ‘Your PC ran into a problem and needs to restart stuck at 100’ error and provide solutions that will help you troubleshoot any issues with your Windows startup process.

Whether you’re an experienced tech user or a beginner, our step-by-step guide will walk you through each solution in detail so that you can get back to using your computer without any further interruptions.

Common Causes of the Error

You’re probably wondering what could have caused this frustrating error to happen in the first place. Well, there are a few common causes that might be behind your PC running into a problem and needing to restart stuck at 100.

One possible reason is hardware issues. If there’s something wrong with your computer’s hardware, it can cause all sorts of problems, including startup errors like the one you’re experiencing now.

Another potential culprit is software issues. Sometimes an application or update can cause conflicts that lead to errors like the ‘your pc ran into a problem and needs to restart stuck at 100’ issue.

To troubleshoot these types of issues, you can check your system logs for error messages that might give you more insight into what’s causing the problem. By identifying the underlying issue, you’ll be able to take steps towards fixing it and getting your PC back up and running smoothly again.

How to Fix the ‘Your PC Ran into a Problem and Needs to Restart Stuck at 100’ Error

To fix the ‘Your PC Ran into a Problem and Needs to Restart Stuck at 100’ error, you can try booting your computer into Safe Mode.

This will allow you to troubleshoot any software or driver issues that may be causing the problem.

You can also use System Restore to revert your computer back to a previous state when it was working properly.

If there are corrupted system files, you can repair them using Command Prompt.

Updating or rolling back drivers may also help resolve the issue.

Finally, scanning for malware or virus infection is recommended as well.

Boot into Safe Mode

Once you’ve booted into Safe Mode, the path to resolving the issue will become much clearer. This troubleshooting step is crucial for fixing the ‘Your PC Ran into a Problem and Needs to Restart Stuck at 100’ error. Follow these steps to access Safe Mode:

  1. Press the power button on your computer to start it.
  2. As soon as Windows starts loading, press and hold down the Shift key.
  3. Keep holding down the Shift key until you see an Advanced boot options screen.
  4. Select Safe Mode from the list of options.

Once you’re in Safe Mode, you can try several troubleshooting steps to fix this error.

For example, you can run a virus scan or check for corrupted system files using SFC (System File Checker). You can also update device drivers or uninstall recently installed software that may be causing conflicts with your system’s hardware or drivers.

Use System Restore

Now that you are in safe mode, let’s move on to another troubleshooting step – using system restore.

Use System Restore

In Safe Mode, try using System Restore to roll back your computer’s settings to a previous point in time and potentially resolve the issue causing the error.

To create a system restore point, go to the Start menu and type ‘create a restore point’ in the search box. Click on ‘Create a restore point’ from the results and then click on ‘Create’ button. Give your new restore point a name that you’ll remember easily.

If you encounter any troubleshooting system restore errors, such as not being able to create or use a system restore point, there are several solutions you can try.

First, run an antivirus scan to ensure that malware is not interfering with System Restore. If that doesn’t work, try disabling your antivirus temporarily before creating or using a system restore point.

Another solution is to check if there is enough disk space available for creating a new restore point by going into Disk Cleanup and deleting unnecessary files.

Once you have successfully created a system restore point, move on to repairing corrupted system files with Command Prompt.

Repair Corrupted System Files with Command Prompt

If you’re experiencing errors or glitches on your computer, you can repair Windows’ corrupted system files with Command Prompt. Using the SFC (System File Checker) tool, you can perform a System File Check to scan and restore missing or damaged files.

This built-in utility is available in all Windows operating systems and can help fix various startup issues. To use SFC, open Command Prompt as an administrator by typing ‘cmd’ in the search bar and clicking ‘Run as administrator’.

Once opened, type ‘sfc /scannow’ and press Enter. The tool will start scanning your system for corrupt files and repair them automatically if possible.

It’s important to note that this process may take some time to complete, so be patient and let it finish before trying anything else. If the scan finds any errors but cannot fix them automatically, try running the command again or consider other solutions like updating or rolling back drivers.

Update or Rollback Drivers

Updating or rolling back drivers can be a quick and effective solution to fix glitches and errors on your computer. Here are some steps you can follow to update or rollback driver updates:

  1. Open the Device Manager by right-clicking on the Start button and selecting it from the list.

  2. Locate the device that has an issue, right-click on it, and select ‘Update driver software.’

  3. Choose ‘Search automatically for updated driver software’ and let Windows search for available updates online.

  4. If you suspect that a recent driver update caused the issue, you can also choose ‘Rollback driver’ instead of updating it.

By following these steps, you may be able to resolve any problems related to outdated or faulty drivers on your computer.

However, if this doesn’t work, you might need to scan your system for malware or virus infection as the next step in troubleshooting your PC issues.

Scan for Malware or Virus Infection

Don’t overlook the importance of scanning for malware or virus infections; doing so can help identify any potential threats that may be causing issues on your computer. Malware and viruses can corrupt system files, damage hardware, and steal personal information.

To scan for malware or virus infections, you can use various malware removal tools such as Windows Defender, Malwarebytes, or Avast Free Antivirus.

To prevent virus infection from occurring in the first place, it’s important to follow some prevention tips. Firstly, don’t click on suspicious links or download attachments from unknown sources. Secondly, keep your operating system and antivirus software up-to-date to ensure their effectiveness against new threats. Lastly, avoid using public Wi-Fi networks as they are vulnerable to cyber-attacks.

By following these tips and regularly scanning for malware or virus infections, you’ll be able to maintain a healthy computer system that functions optimally without any issues like being stuck at 100%.


In conclusion, dealing with the ‘Your PC Ran into a Problem and Needs to Restart Stuck at 100’ error can be frustrating but it isn’t an insurmountable issue.

By identifying common causes such as outdated drivers or corrupted system files, you can take steps to fix the problem. It’s important to use reliable and reputable software tools when addressing these issues.

Remember that prevention is key in avoiding these types of errors. Regularly update your operating system and drivers, keep your antivirus software up-to-date, and avoid downloading suspicious files or visiting questionable websites.

By taking these proactive measures, you can minimize your risk of encountering startup issues in the future. With some patience and know-how, you can get your computer back up and running smoothly again.